NEW TOP SERIES
Frame depth 78 mm, sash 94 mm;
The profiles used are in laminated pine wood. The angular junction cut of the frame is at 90 ° and the door is at 90 °. The angular junction of the frames takes place with a tenon system and gluing. Finishes made with water-based products.
The profiles are extruded in 6060 aluminum alloy (UNI 9006/1). The angular cut of the junction of the door and the frame is at 45 ° with crimping and sealing of the corner. The frames are suitably perforated to ensure micro-ventilation and drainage. The finishes by means of anodizing or with powder coating.
COMBINING WOOD AND ALUMINUM
The union of the two materials takes place with swiveling nylon clips.
The seals applied are in elastomer (EPDM) and in thermoplastic elastomer (TPE);
The Top series mounts:
– 3 stop gaskets;
– internal and external glass belt gasket.
The glasses used comply with the safety and insulation standards required by the legislation: Double-glazed safety (laminated) low-emission and Argon gas and glass with warm edge (Warm edge) as standard. Four-season glass (4S) as an option. The profiles ensure the insertion of triple-glazing for more insulating glass.
The perimeter shutter / tilt-and-turn hardware system (belt) of high quality standards is used, guaranteeing safety (anti-burglary and solidity), comfort in use and durability.
Air permeability: 4
Water tightness under static pressure: E750
Wind load resistance: C4
(Test reports according to UNI EN 1026 \ 1027 \ 12211)
Thermal transmittance: Uw = 1.22 W / mqK
(The test was performed on a window with 2 sashes: L 1250 x H 1500 mm with glass value Ug = 1)