SERIES THREE
Frame depth 81 mm, sash 94 mm;
WOOD
The profiles used are in solid white ash wood. The angular junction cut of the door and the frame is at 45 °. The corner joint of the frames is with a dovetail and gluing system. The finishes made with water-based products.
aluminum
The profiles are extruded in 6060 aluminum alloy (UNI 9006/1). The angular junction cut of the door and the frame is at 45 ° with crimping and sealing of the corner. The frames are perforated to ensure micro-ventilation and drainage. The finishes are made by means of anodizing or with powder coating..
COMBINING WOOD AND ALUMINUM
The union of the two materials takes place with swiveling nylon clips.
GASKETS
The seals applied are in elastomer (EPDM) and in thermoplastic elastomer (TPE);
The Top series mounts:
– 3 stop gaskets;
– internal and external glass belt gasket.
GLASS
The glasses used comply with safety and insulation standards
required by law: low-emission double-glazing (laminated) and Argon gas as standard and warm edge glazing. Four-season glass (4S) as an option. The profiles ensure the insertion of triple-glazing for more insulating glass.
HARDWARE
The perimeter shutter / tilt-and-turn hardware system (belt) of high quality standards is used, ensuring safety (anti-burglary and solidity), comfort in use and durability.
CLASSIC
Chestnut
Cherry
Mahogany
Natural
Walnut
Dark walnut
CUSTOMIZABLE
impregnating paint
RAL Grey
RAL Green
open-pore lacquered
Bleached ivory
Bleached white
Air permeability: 3
Water tightness under static pressure: 6A
Wind load resistance: C3
(Test reports according to UNI EN 1026 \ 1027 \ 12211)
Thermal transmittance: Uw = 1.44 W / mqK
(The test was performed on a window with 2 sashes: L 1250 x H 1500 mm with glass value Ug = 1)
